Dominator 700R4 Transmission 2wd or 4x4 750 HP!! No core charge!!

Description

Level 4 700R4 Transmission and Converter of Your Choice From 1600 to 2400 Stall. Transmission comes with tail housing.
FREE SHIPPING TO MOST STATES.  If
you are in Pacific or Mountain time zones there will be an additional charge of 5.00 for commercial business shipping or 5.00 for residential shipping.
Transmission and converter comes with a one year unlimited mile warranty extended warrantees are available!
*(Within Continental U.S. to a Business address or nearest freight terminal)
I back up all my work with a one-year unlimited mile warranty!
Level 4 700R4/4L60 FULL COMPETITION- Rated up to 750 HP!!
Comes with full competition reverse pattern full manual valve body or a automatic valve body, which can also be shifted manually when you choose. At no extra charge great for street or strip applications very strong and reliable 4×4 or 2WD!!
You get a stall speed CONVERTER of your choice from 1600 UP TO 2500 STALL with this package. We do offer higher stall speeds for additional costs. Transmission comes with tail housing if needed at no extra charge!
Others try to copy my ads, but they can never copy my work!
All new lip seals
All new gaskets
All new Teflon rings
New filter
All new steels
All new bushings
All new Raybestos Clutches
All new double-gauged sprag, with a super fourth gear sonnax servo.
Full Competition, Reverse Pattern Valve Body, or a trickout automatic valve body, all depending on what you are doing with the vehicle. We also run a Raybestos Z-pak!!
Beast Sun Shell 3x thicker than factory, a super strong modified input drum we pressed in a hardened sleeve to reinforce the input shaft and then run an oversize piston and start adding clutches!!
Also comes with all new electronics.
Transmission comes with tail housing if needed at no charge.
This Level 4 transmission comes with an Mad Dog Reprogramming Kit, Mad Dog shift kit, and Raybestos 15 clutch Z-pak which is top of the line and can take tons of horse power and torque (replaces factory 5 clutches in the 3-4 drum), all Raybestos high temp high energy clutches through out the rest of the unit, all new steels, band, bushings, and rings. A 500 boost valve, 10 vane pump rotor. The reason we run a 10 vane pump rotor and not a 13 vane pump rotor is because the more vanes it has in it weakens the rotor. We also use 4140 hardened pump rings. We machine a specialized bronze ring to re-enforce the hardened input shaft and drum. this is a MUST for BIG HORSE POWER Applications. Built with TEFLON pump bushing, a 29 element double-gauged sprag, 4 pinion planetary gear (which has also been cold-freezed to withstand big horsepower and torque), 3″ wide high-temp Pro-Series Kevlar band, Corvette Servo/Super Sonnax 4th gear Servo and a Super heavy-duty Sun Shell. We discard the springs in the accumulators, because they constantly break and contaminate the transmission with metal filings. One, two, and three/four accumulators are blocked off, on the full manual valve body to give you a nice solid shift every time. For more street use we use double sealed pinless accumulators this set up is more street friendly. This transmission can also be setup for pulling and towing (no extra charge).
NOTE: Let us know what type of shift you want. We can custom build each valve body for your application.  I have been building transmissions for over 26 years. I’m a former NHRA Drag Racer. It’s always best to put top of the line components in the transmission, however if you don’t install them properly and check all your clearances, etc., ANY transmission will fail. We provide excellent technical support to all our customers. We will walk you through the proper installation of your new transmission.
If you have more than 800 HP go with are super H-D 4L80E! We can build it full manual which will not need a computer.
Thank you MaddogLou